------------------------------------------------------------------------------------------------------------------------------------------

  • 1. Number of Input CH - 1 STEREO CH  = LEFT IN + RIGHT IN (1-2)
           *on rear side marked as: [ CH1 - 1-2 ] where the 1 is Left / 2 is the Right input
           * eg. 8 STEREO CH = 16 BALANCED INPUT as 8L and 8 R







------------------------------------------------------------------------------------------------------------------------------------------
  • 2. Input type: TRS or DB25  or MIXED (TRS and DB25)
               * TRS BALANCED / DB25 TASCAM STANDARD ANALOG (not AES/EBU)
       





------------------------------------------------------------------------------------------------------------------------------------------
  • 3. Number and type of Output CH:  TRS or DB25 or XLR balanced (or mixed)
                                                                     1xStereo out L/R (MAIN)
                                                                     2xStereo out (MAIN / MONITOR)           
                                                                     3xStereo out (MAIN / MONITOR/VU METER)
           * passively splitted / hard wired / the master signal is the same on all outputs
           ** XLR out need more space, usually 2xStereo out build in 2U rack




------------------------------------------------------------------------------------------------------------------------------------------
  • 4. Stereo to mono option:
  • enable to switch a stereo input CH to (two) separate mono centered inputs
           CH1 to 1-2 mono, CH2 to 3-4 mono, CH3 to 5-6 mono, CH4 to 7-8 mono and so on...
           OFF stage: works as standard stereo balanced inputs (CH1=L+R) with pan control from DAW
           ON stage:  works as separate mono centered inputs without panorama  control.
           Routing from DAW: send out CH1 Left mono track (bass) to summing CH1 Left
                                 send out CH1 Right mono track (bassdrum) to summing CH1 Right
               * with STM(Stereo to mono) option can save a lot of DAW interface out
           **no need to waste precious stereo CH's for mono instruments like bass, sub bass, bassdrum etc.
           ***clarity of position in the stereo field (mono is true mono)

      



------------------------------------------------------------------------------------------------------------------------------------------
  • 5. Active/Passive option: (2 in 1) SWITCH OPTION!
           ACTIVE -   Internal Amp for make up gain
           PASSIVE - External Mic Pre's or Line amplifier,  to get a  wide tonal character
           Benefits: different amp = different sound character
          

    




------------------------------------------------------------------------------------------------------------------------------------------
  • 6. Send/Return  option: for external gears like EQ, Comp, Limiter etc.
           AUTO SWITCH: the signal was non interrupted if nothing connected to SEND.
           BYPASS SWITCH on front panel:  Enable=Signal to external / Bypass = Sihnal to Master out

                 * ( the 100% of signal sent to insert point!)
             ** AUTO SWITCH - internally switched TRS balanced insert point
             *** with BYPASS option can compare the signal differences (eg. with compressor and without compressor)
               
       



------------------------------------------------------------------------------------------------------------------------------------------
  • 7. Partial SUM Bypass or Total SUM Bypass option by switch on desired stereo input CH
               Enable: signal  to summing amp/or/master out
               SW Disable: signal goes to summing network as regular summing input
               * can be connected another summing mixer or input signal for comparison purposes






------------------------------------------------------------------------------------------------------------------------------------------
  • 8. Monitor control: select out signal by ON/OFF switch
               eg. ON/OFF A, ON/OFF B, ON/OFF C, ON/OFF D, and so on







------------------------------------------------------------------------------------------------------------------------------------------
  • 9. UNIQUE DESIGN ENGRAVE or Your Name or studio name on faceplate


           PANEL EXAMPLE



------------------------------------------------------------------------------------------------------------------------------------------
Payment and order

  • Paypal or Bank transfer (after technical and  financial agreement)
  • Shipping via Economy or Express post parcel with insurance and tracking number

Build time depend of project size:  5 - 10 -15 working/ busines days


Laser Engraving process starts after Your confirmation!
(we send the laser engraving "draft" plan to your approval)

------------------------------------------------------------------------------------------------------------------------------------------
What we guarantee

  • Quality components
  • Continuous follow-up of Construction
  • Daily send e-mail photos of the construction status (if need)
  • After purchase: service, support and warrantee (1 year)

------------------------------------------------------------------------------------------------------------------------------------------

Let's build your unique gear !
Select from the following options and send me your setup by mail to make the best gear for your studio!

Rack unit size: 1U, 2U, 3U
Card type: Neumann 2A, 2B, 2C, Lawo, Filtek or *NE2OX
Input number CH: eg. 16 in = 8Left and 8 Rigt input
Input type: TRS or DB25 or XLR (XLR need more space,usually 2U)
Out number: 1xStereo, 2xStereo (Main/Monitor) 3xStereo or more
Out type: TRS or DB25 or XLR (XLR need more space,usually 2U)
Master out control by switch: eg. - A/B/C/D out signal ON/OFF
Stereo to mono input option: 1x, 2x, 3x or more (1xStereo to mono = 2 mono)
Active/Passive by switch option (Active=Internal Amp / Passive=External Amp)
Send/Return/Bypass by switch via TRS / DB25 / XLR balanced
Multiple chained Send/Return/Bypass by switch as SNDA / SNDB /SNDC etc
Partial SUM Bypass or Total SUM Bypass on desired stereo input CH Monitoring and Comparison purposes
Stereo to mono option on master out (for mono compatibility test)
POWER LED: Blue, Yellow,Green, Red
110-220VAC / 24VDC PSU (EU Plug)
Unique engrave your Name or Studio Name
Unique design based on your ideea

designed and created by VintageMaker