1 IN / 2 OUT & 2 IN / 1 OUT RCA Bi-Directional Audio Line Switcher – 3-Position BBM Center Mute, Hi-Fi & Studio
Price range: 199.00 € through 219.00 €
Professional 3-Position RCA Bi-Directional Non-Shorting Rotary Switch Audio Line Switcher featuring Break-Before-Make (BBM) switching with a CENTER MUTE position. Supports both 1 IN / 2 OUT and 2 IN / 1 OUT configurations for flexible stereo audio routing in Hi-Fi systems, recording studios and professional audio setups.
2-WAY IN → 1-WAY OUT
OR
1-WAY IN → 2-WAY OUT
- RCA SIGNAL GROUND ISOLATED FROM CHASSIS
- PASSIVE BI-DIRECTIONAL RCA AUDIO SWITCH – HI-FI & STUDIO
- Selectable Silver-Plated or OFC Copper Internal Wiring
- FULLY BI-DIRECTIONAL – YOU CHOOSE THE FUNCTION BY HOW YOU CONNECT IT!
- WORKS IN BOTH DIRECTIONS!
- GROUND-INDEPENDENT SIGNAL ROUTING
- CHASSIS-ISOLATED RCA CONNECTORS
- ONLY ONE SIGNAL PATH ACTIVE AT A TIME
- 3-Position Center Mute BBM – NON SHORTING SWITCH – NO SHARED SIGNAL GROUND
- NO STEREO CROSSTALK!
- HELPS PREVENT GROUND-LOOP HUM
- BI-DIRECTIONAL OPERATION
- NO ELECTRICAL CONNECTION BETWEEN L/R CHANNELS
- NO SIGNAL GROUND LEAKAGE BETWEEN SWITCHED PATHS
- CUSTOM LABEL AVAILABLE!
1 IN / 2 OUT & 2 IN / 1 OUT RCA Bi-Directional Audio Line Switcher – 3-Position BBM Center Mute Non-Shorting Rotary Switcher
A premium-quality, fully passive Bi-Directional RCA Audio Line Switcher designed for Hi-Fi systems, professional recording studios, studio monitoring, amplifiers, preamps, DACs, audio interfaces and other RCA-connected equipment.
This versatile RCA switcher supports two operating configurations: 2 IN / 1 OUT (4-to-2 channel) or 1 IN / 2 OUT (2-to-4 channel). Switch between two independent stereo audio sources or two stereo destinations using a single compact unit.
Featuring a 3-Position Break-Before-Make (BBM) switch with a CENTER MUTE position, the unit provides reliable signal selection with an intermediate OFF position between the two switching positions.
Bi-Directional Operation – Two Configurations in One Unit
The switcher can be used in either direction, depending on your connection configuration:
- 2 IN / 1 OUT – 4-to-2 Channel: Select between two stereo audio sources and route the selected signal to one stereo destination.
- 1 IN / 2 OUT – 2-to-4 Channel: Route one stereo audio source to either of two stereo destinations.
Switching positions:
- Position A – Selects signal path A.
- Center – MUTE (both signal paths disconnected).
- Position B – Selects signal path B.
3-Position BBM Switching – CENTER MUTE
- Break-Before-Make (BBM) switching topology.
- Three mechanical positions: A / CENTER MUTE / B.
- The center position disconnects both signal paths.
- Prevents momentary connection between the two switching paths during operation.
- No active electronics in the audio signal path.
Chassis-Isolated RCA Connections & Independent Ground Switching
The RCA connectors are electrically isolated from the metal chassis. The signal-ground connections are switched independently alongside the corresponding audio signal paths.
- Electrically isolated RCA connectors.
- 4-pole BBM switching independently switches the stereo signal conductors and their respective signal grounds.
- No permanently shared signal ground between the two switching paths.
- Only the selected signal-ground path is connected to the chassis.
- Independent left and right channel signal paths.
This ground-switching arrangement helps prevent unwanted ground interaction and ground-loop hum when switching between separate audio systems.
Important: This is passive ground-independent signal switching, not transformer-based galvanic isolation. It eliminates the direct shared signal-ground connection between the switched systems, but cannot guarantee hum-free operation in every installation. Ground loops or noise originating elsewhere in the connected equipment remain outside the switcher’s control.
Key Features
- Fully passive discrete audio switching – no active electronics in the signal path.
- Bi-directional RCA audio routing.
- 1 IN / 2 OUT or 2 IN / 1 OUT configurations.
- 2-to-4 / 4-to-2 channel switching.
- 3-position BBM switching with CENTER MUTE.
- Independent stereo signal-ground switching.
- RCA connectors electrically isolated from the metal chassis.
- No power supply required.
- Suitable for Hi-Fi and professional studio line-level signals.
- Custom front-panel text available.
- Choice of knob styles available.
- Optional silver-plated copper or OFC copper internal wiring.
Applications
Ideal for:
- Hi-Fi stereo systems and audio component selection.
- Studio monitoring and monitor-path selection.
- Stereo amplifier and preamplifier switching.
- DAC and audio interface output selection.
- Outboard audio equipment and line-level routing.
- Subwoofer input and output selection.
- Switching between two independent stereo audio systems.
Custom Text & Knob Style Options Available
You can specify your own front-panel label and choose your preferred knob style to suit your studio or Hi-Fi setup.
Custom configurations and channel counts are available on request.
Let’s build your gear!
Build Time: 10 working weekdays after cleared payment.
Don’t see the controller or switcher you need? Tell me what you’re looking for, and I’ll see what I can build for you.
A premium MM/MC phono cartridge selector switch designed for high-quality analog vinyl playback systems. Features a precision black 22mm forged aluminum selector knob and high-quality OFC oxygen-free copper internal wiring. Provides convenient selection between Moving Magnet (MM) and Moving Coil (MC) cartridge configurations, making it an ideal addition to high-end turntable and phono preamp setups.
| KNOB STYLE | VINTAGE WHITE, VINTAGE BLACK, BLACK PLASTIC ROUND 20MM, BLACK FORGED ALUMINIUM ROUND 22MM |
|---|---|
| INTERNAL WIRING | OFC Copper, Silver-Plated Copper |
| CUSTOM NAME? | YES PLEASE, NO THANKS |
1 review for 1 IN / 2 OUT & 2 IN / 1 OUT RCA Bi-Directional Audio Line Switcher – 3-Position BBM Center Mute, Hi-Fi & Studio
5.00 out of 5 stars
Add a review
You must be logged in to post a review.




























Rico Battistini –
Absolute top quality and flawless craftsmanship!
I am using a custom-engraved RCA switcher from Paul and I am simply thrilled. The build quality is on a whole other level – nothing wobbles, the haptics of the switches are fantastic, and the signal integrity remains 100% pure. No interference, no channel crosstalk, just clean analog handcrafting. You can immediately tell that this is built with genuine expertise and meticulous attention to detail. Absolute recommendation for anyone who refuses to compromise in their HiFi chain!