2 Channel – Variable Line Level Audio Attenuator pad – 2 in 2 out -35/-45dB Attenuator Box (ask for different value)

The fixed or the variable attenuator – Line to Mic Level Pad – Studio Attenuator Box can be used as a load box, line-level inputs (+4 dBm nominal) and produces attenuated mic  or line level output for balanced or unbalanced signal.

Balanced line/mic pad with two attenuation options -15/-25dB or -25/-35dB is perfect for padding various signals (MicPre I/O) so you can run them hot without clipping your converters. You can order lower or higher values like: 0/-10dB, -5/-15dB, -20/-30dB, -15/-25dB, -25/-35dB, or more.

You can ask for Silver Plated copper internal wiring

Do not find your summing mixer? Tell me your DAW Interface Type! Ask to build Yours!

ORDER HERE

2 in 2 out 1/4″ TRS audio pads – transparent and clean – Dual Stereo Balanced with Silver Plated Copper Wires passive line-level attenuator with Variable -15 Gain (relative to 0dB) control fixed level adjustment without signal frequency loss thanks to Vishay Precision Metal Foil Resistors. Operates in either high or low impedance, balanced or unbalanced mode.