Contact Can’t find what you’re looking for? Contact me and feel free to ask!

Studio Line Signal Splitter – Summing Mixer Hybrid Mixing

0.00 

ANY CONNECTOR TYPE CAN BE ORDERED IN ANY SEQUENCE AND VARIATION

ASK TO BUILD YOURS!

Customer request: The unit is a bit of a hybrid. It is a 1U rack. On the input side, I want the (A) input to be 1x stereo, and the (B) input to be 2x stereo (which will be summed to the output). Additionally, there should be a switch on the input side to select either the A or B input. The output is 1x stereo out, balanced TRS. So will be a Studio Line Signal Splitter – Summing Mixer Hybrid Mixing

Specs:
Balanced Splitter: A side
1 x Stereo IN TRS balanced
2 x Stereo OUT TRS balanced
Balanced Splitter: B side
1 x Stereo IN TRS balanced
2 x Stereo OUT TRS balanced
Line/Sum 
Input A
1 x Stereo IN TRS balanced
Input B
1 x Stereo IN TRS balanced SUM
1 x Stereo IN TRS balanced SUM
1 x Stereo OUT TRS balanced
A/B Input select switch
-6dB reduction relative to 0dB

Frequency Response (Passive Section) +0, -0.1dB from 10Hz to 30kHz
Maximum level > +28dBu • Noise floor < -94.5dBu 22Hz-22kHz bandwidth
THD+N < 0.004% • IMD < 0.004%
Crosstalk rejection (Passive Section) > 110dB

Do not find your desired gear?  Ask to build Yours!

You can get as many channels and options as you want, so let’s build your gear!

Build time: 15 Working Weekdays after cleared payment

Selected Studio grade VISHAY DALE military metal-film resistors
In/Out: Stereo Balanced Discrete path
Output impedance 600 -1k ohms balanced
Frequency response: 0-500Khz
Crosstalk 1Khz: -95dB
Signal to Noise rate (SNR): -110dB
TRS wiring: (Tip:HOT/,Ring:COLD/Sleeve:GROUND)
Pure hand made! Hand wired and tested point-to-point!
Laser engraved massive aluminium alloy box

 

SOUND CARD?

UAD Apollo, Apogee, Arturia, Antelope, Behringer, Focusrite, M-Audio, Motu, PreSonus, Prism, RME, Roland, SSL, Steinberg, Tascam, External Preamp – let me know, OTHER – let me know

VARIABLE HEADROOM GAIN SWITCH

-6/-16dB, -10/-20dB, -15/-25dB, -20/-30dB

OUTBOARD HARDWARE INSERT

PREAMP – type?, COMPRESSOR – type?, LIMITER – type?, CHANNEL STRIP – type?, EQUALIZER – type?, EFFECT PROCESSOR – type?, OTHER – let me know

CUSTOM NAME?

YES (let me know), NO THANKS

BUILD TIME

15 WORKING DAYS

Reviews

There are no reviews yet.

Add a review

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.